Subscribe to newsletters

Repair service for SCEPTRE X42BV-FULLHD power supply board causing dead or not powering on TV

If your SCEPTRE X42BV-FULLHD is either totally dead or takes a few attempts to power on or powers on and right back off then its power supply board may be bad

Coppell TV Repair offers a REPAIR SERVICE for power supply board FSP270-4M02 shown on the picture and used in SCEPTRE X42BV-FULLHD LCD TV.

REPAIR SERVICE means that you need to send us your malfunctioning board that we will attempt to service, test and return to you.

The repair service is not limited to the described failure symptoms. We do what needs to be done to get the board working, provided it meets the below requirements.

Success is not guaranteed, but if we fail to succesfuly repair a failed board meeting our requirements (mostly not tampered with) we will not charge any service fees and you will only need to pay return shipping if you want the board back.

SCEPTRE X42BV-FULLHD power supply failure symptoms

Failure in the power supply board of SCEPTRE X42BV-FULLHD is usually manifested by a completely dead TV (no front LED, no response to any command), delayed respose to turn on comamnd (or a few attempts to get it on) or just a momentary flash of the front LED before shutting the TV back down.

Other failures are also possible, of course, and unfortunately some of the listed symptoms can also be caused by other failures in the TV.

Processing time

Typical processing time for the repair is within two business days; if we have any probems that require more time (be it overload or technical problems) we will contact you with an update and request for more time.

We have a fairly high success ratio, but we still do not guarantee success; if we can't get the board to work, though, you will not need to pay.


Presently we do not charge in advance for repair services.

Instead, once the board(s) are received, tested, found to be defective, serviced and tested again to success we send a payment request to the customer.

If something along the process - such as unexpected difficulty or finding a board to be functional - arises we contact the customer via email and/or phone and disscuss options.

Minimal charge / diagnostic fee

If a board arrives and is determined to be functional we charge up to $25 for diagnostic fee.

For explanation of why do we do that please read this article.

Board requirements

We ask that the board arrives here in good physical condition and without traces of tampering. If someone (other than us, that is) has already attempted to service the board then please contact us with a description/pictures and do not directly place an order. We reserve the right to refuse service to boards that have signs of repair attempts.

If you have any questions do not hesitate to ask.